09 Toyota Tundra Key Fob Programming

Then I took both to the local Toyota dealer to program.

09 toyota tundra key fob programming. Step 1 Insert the key in the ignition with the truck off. It works great but the only downfall was that the programming instruction didnt work and I had to get it programmed at Toyota. This will eject the metal ignition key from inside the fob.

Perform this operation twice within five seconds and do not turn the key in the ignition. 1 thought on 2012 Toyota Tundra Key Fob Programming Instructions Vernard Stukes 09292020 at 644 pm I have tried to do several times but not getting any results. Remove master key from ignition cylinder.

Press the button on the side of the fob. Insert the key into the ignition Do NOT Turn Pull key out. The STATUS MONITOR LED turns on for 5 seconds.

Insert the key into the ignition Do NOT Turn it and Pull key out. Step out from your car and test the result. With the key out of the ignition unlock and open drivers door all other doors must be closed 2.

Repeat button procedure to program remaining remote transmitters. YOU WILL NEED ANOTHER KEY FOB PART NUMBER. Insert the key into the ignition and pull it out 4.

I ordered this Key Fob for my 2008 Mazda 6 a few days later I received the unit and went to a local key shop here in Tucson and had the key cut and the fob programmed for my car. 2010-2017 Toyota Tundra Remote Fob Only. 2011-2020 Toyota Sienna Push Button Start.