2000 Toyota Tundra Timing Belt Marks

Timing Belt Kit Water Pump Fit 98-07 Lexus Toyota Sequoia Tundra 47 1UZFE 2UZFE 12900 Permatex 80697 Copper Spray-A-Gasket.

2000 toyota tundra timing belt marks. I need the diagram for 2005 tundra 47L timing belt - 2005 Toyota Tundra Cars Trucks. An expert that has over 500 points. Posted on Dec 14 2014.

It has all the Timing Belt Diagrams you will need complete with Instructional and Directional Diagrams to set your Timing. The new OEM Toyota timing belt will come with its own marks on it. Here are the Bank 1 marks.

1 cylinder is at TDCTemporarily install the timing belt tensionerInstall the timing belt over the crankshaft sprocket then inside the idler pulley over the camshaft sprocket and then inside the timing belt tensionerApply tension to the timing belt by turning the tensioner in the clockwise direction so there is no slack in the belt on the tension sideTighten the tensioner. He actually goes to the ATDC mark. As you apply the belt w the tentioner off the cam marks will move out a hair no longer be ligned up with the marks on the timimg cover backing plate.

Also note that Bank 1 is labeled as the L-Cam and Bank 2 is the R-Cam. They will each be off about 18 away from the marks on the backing plate. On 2002 Camrys and 2002 Tundras some say that the timing belt should be check at every 60K 90K and 120K miles.

I am repalcing the timing belt in my 2000 toyota tundra 47 liter. I changed the following MAF. CARspec had the chance to replace the timing.

Put 1 piston up front pass side feel for air pressure coming out with your finger to assure its on compression stroke. There is another mark that can be seen but just remember we use the T mark for Timing Belt. These marks serve as a Poka-yoke so that you cant get the marks lined up wrong.