2006 Toyota Tundra Reset Low Tire Pressure Light
Disconnect the cables from the back.
2006 toyota tundra reset low tire pressure light. Tire pressure reset process cannot be done while the vehicle is moving. Then while the truck is running hold the tire pressure button for a few seconds until it blinks. 12 Under the right side cigarette lighter there is a 10mm bolt.
The light should go off a few minutes after the tire pressure is adjusted. There are two ways to reset the indicator light - the first is to hold down the button hidden under the dashboard next to the steering column until the light goes out. 1 tire go almost flat filled the tire up but the warning light on the dash was on.
Many Toyota Tundra models are outfitted with a tire-pressure-monitoring system that displays a low-tire-pressure warning on the control panel if it detects one of the tires is low. Inflate each tire to its ideal PSI then deflate the tires to zero. First Gen Tundra 2000-2006.
If the warning light blinks the tire pressure warning system may be malfunctioning. Then inflate again and drive for a couple of minutes at 15 mph to manually calibrate the sensors. Turn the ignition key to the ON position without starting the engine.
I took a trip to the dessert in 100 degree weather and the tire pressure wen. That it is the full procedure how to reset low tire pressure warning. When the tire is filled or if the tires are changed or rotated the tire-pressure sensors must be reset to turn off the warning light and reinitialize the system.
Adjust the cold tire pressure in all four tires recommended on the tire placard. It will flash approx. Apply the parking brake and turn the ignition to ON position with the engine OFF not the ACC position.