2007 Toyota Tundra 5.7 Starter Removal
Two weeks ago I went to start the truck and it wouldnt crank.
2007 toyota tundra 5.7 starter removal. 1 disconnect battery 2 remove any wires connected to the starter 3 remove mounting bolts 4 catch the starter and manouver it through your suspincion 5 you may need to reverse 2 and 3 depending on how hard the wires are to get to 6 now revers these steps with new starter. Now you can twist the starter out and away from its mounting position. Changed the starter on my 2008 Toyota Tundra 57 LTR 2wd without taking it apart.
Posted by Anonymous on Sep 06 2014. When I turned the key the ECM got the signal to crank the motor. My 2007 57L RCSB had the starter fail around 205k miles in 2017.
Pull the plastic hinged plate from the wiring connection and remove the 12mm bolt 9. The easy way to replace the starter without removing any exhaust components or touching it. You can see the bottom one you cannot see the top one.
The easy way to replace the starter without removing any exhaust components or touching it. 759 to 1099 Customized for your location Estimate includes. Starter Replacement 57L V8 for your 2007 Toyota Tundra near 77095 RepairPrice Estimate.
277-484 excludes tax fees Parts Included. These are long and only need to be turned a couple of turns to loosen and you can get them the rest of the way out by hand if your hands are small enough and use a long wedge bar over the frame and under the starter to relieve the tension on the starter as it loosens. 15 hours to remove and 45 minutes to replace.
Remove the solenoid connection. 15 hours to remove and 45 minutes to replace. NPT Blue - A72452C.